The speed system affects A (including A’)
and B risers. Pressing the speedbar
shortens first the A risers, before first use
then gradually the A’ i B. C riser retains its
original length.
Caution:
Ill-adjusted speed system renders
the certification invalid!
How to adjust it?
Most of modern harnesses are equipped
with speed system pulleys and sometimes
even its own integrated speedbar. The
speed bar cord must be firmly attached to
it.
The other end of the cord must be ran
upward through the harness pulleys and
attached to the hooks.With well adjusted
speed system you should see the pulleys
on the risers touch each other at max
speedbar, meaning you are using the full
range of speed system.
Caution:
Make sure that both cords on the
speed bar are equal, as even slight
difference can result in constant,
inadvertent turning of the paraglider.
Before take-off attach paraglider risers to
the harness with the main carabiners. Then
connect the hooks of the speed system
cords with hooks at the A-risers.
Caution:
Before launching make sure that
the speed system is not tangled and runs
freely.
Other systems
This paraglider has no other systems which
can be adjusted, exchanged or removed.
10
Before first use
NEMO
