5
6
OPERATING INSTRUCTIONS
Special functions
Improving the quality of indoor air is one of the purposes of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specific
configuration of the model). With the anions generated by Ionizer, the air circulation
of the air conditioner fills the room with refreshing, natural and healthy air. The Plasma
Dust Collector generates a high voltage ionization zone, through which the air is
converted to plasma. Inside the air most of the dust, smoke, and pollen particles are
captured by the electrostatic filter.
CLEAN AIR function(on some models)
SELF CLEAN function
Optional
Function used after the Shut Down of cooling operation to clean the Evaporator
and keep it as fresh for the next operation.
The unit will operate as following sequence : FAN ONLY mode at Low fan speed--Heating
operation with LOW fan speed(applicable to cooling & heating modles only) ---FAN ONLY
operation--Stop Operation---Turn off.
This function is only available under COOL(AUTO COOL, FORCED COOL) and DRY mode.
Before select the function, it is recommended to run the air conditioner under Cooling
operation for about half an hour. Once the Self Clean function is activated, all TIMER
setting will be cancelled.
During Self Clean operation, when press the SELF CLEAN button on the remote
controller again will stop the operation and turn off the unit automatically.
Note:
8. Connecting
9. Connecting
10. Stop valve
pipe
cable
Outdoor unit
Air inlet(
rear)
Air inlet
(side)
Air outlet
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5.
6.
7. Display panel
Horizontal air flow grille
Vertical air flow louver(inside)
Indoor unit
4
3
5
2
6
1
9
10
8
7
Louver Angle Memory Function(optional):
Within the scope of safety angle, it will memorize the open angle of horizontal louver.
If it exceeds, it will memorize the boundry of safety angle. In the following circumstances,
it will return to standard angle: 1) pressing the manual control button, 2)unplug and then
plug in the machine. So we strongly suggest that the open angle of the horizontal louver
should not be set too small, in case the condensed water forms and drops from the
horizontal louver.
Refrigerant Leakage Detection
With this new technology, the dipsplay area will appear EC (if applicable) and the LED
indication lamps continue flashing when the outdoor unit detects refrigerant leakage.
,
,
RUN indication lamp
This lamp illuminates when the air
conditioner is in operation.
TIMER indication lamp
Lights up during Timer operation.
FRESH indication lamp(optional)
Lights up when Clean Air feature is activated.
DEFROST indication lamp
(Enabled on cooling & heating models only):
when the air conditioner starts
defrosting automatically or when the warm
air control feature is activated in heating
operation.
Lights up
A
B
Temperature indicator
Displays the temperature settings when the
air conditioner is operational.
Displays the malfunction code.
fresh defrost run timer
fresh defrost run timer
Anti-mildew function
Optional
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue
operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on
HEAT mode, the unit will continue operating for about 30 seconds at LOW fan speed. This will
help to dry up the condensed water inside the evaporator, and prevent the breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.
NAMES OF PARTS
Indication lamp
NOTE:
All the pictures in this manual are for
explanation purposes only.
The actual shape shall prevail.
The actual shape
of the indoor unit you purchased may be slight
different on front panel and display window.
Names of parts