Ducati SUPERBIKE 1098 Tricolore, Руководство по эксплуатации и обслуживанию, Страница: 26 / 122

26
E
LAP Memory display
Displays the data saved with the LAP function: lap time, MAX
speed and MAX rpm.
To display the saved lap times, go into the menu and select
the “LAP MEM” page.
From this page, if you hold button (1, fig. 8) in position B “
▼
“
for 3 seconds, the data for the first lap will appear. The
display will show the lap number, lap time, MAX speed and
the MAX rpm reached for the lap in question.
If you press the button (1, fig. 8) in position B “
▼
“, the
display scrolls through the 30 saved times, before returning
to the 1
st
lap.
If you hold button (1, fig. 8) in position B “
▼
“ for 3 seconds
while the saved times are displayed, the display immediately
resets all the saved times. In this case, if the LAP function
was active, it is switched off automatically.
The MAX speed saved is the maximum speed indicated on
the display in Lap function.
During saving, if the MAX speed shown exceeds 299 km/h
(186 mph), the speed reached is displayed (e.g. 316 km/h).
If there is no reading in the memory, the 30 times are shown,
with the lap timer showing “00.00.00”, MAX rpm = 0 and
MAX speed = 0.
During the lap, if the engine reaches one of the two
thresholds before the rev limiter or the rev limiter itself, the
respective warning lights (10, fig. 4) come on during the
display of the saved times.
Press B
Press B. . x 19
Press B. . x 19
B= On 3 sec.
R e s e t o f a l l t i m e s i n m e m o r y
Press A
Press A
Press B
Press B
Press A
Press A
fig. 20