Ducati Super Sport SS800, Руководство пользователя, Страница: 58 / 89

58
E
The height of the light beam can be corrected using the
screw (1, fig. 62) on the left side of the headlamp. Turn the
screw clockwise to lower the beam, anticlockwise to raise it.
The side position of the headlamp is adjusted using the
adjusting screw (2, fig. 62) on the right side of the headlamp.
Turn the screw clockwise to move the beam to the right,
anticlockwise to move it to the left.
Tyres
Front tyre pressure:
2.1-2.2 bar
Rear tyre pressure:
2.12.3 bar
As tyre pressure is affected by temperature and altitude
variations, you are advised to check and adjust it whenever
you are riding in areas where ample variations in temperature
or altitude occur.
Important
Check and set tyre pressure when tyres are cold.
To avoid front wheel rim distortion, when riding on bumpy
roads, increase front tyre pressure by 0.2 - 0.3 bar.
RIGHT
LEFT
RIGHT LEFT
LOWER
UPPER
2 2
1
fig. 62
DUCum_SS800#####07###e.book Page 58 Wednesday, April 12, 2006 5:00 PM