Ducati Streetfighter, Руководство пользователя

Страница: 245 / 272

Cleaning the motorcycle
To preserve the finish of metal parts and paintwork,
wash and clean your motorcycle at regular intervals,
anyway according to road conditions. Use specific
products only. Prefer biodegradable products. Avoid
aggressive detergents or solvents.
Use only water and neutral soap to clean the seat.
Periodically clean by hand all aluminium
components. Use special detergents, suitable for
aluminium parts. Do NOT use abrasive detergents or
caustic soda.
However, the warranty does not apply to
motorcycles whenever poor maintenance status is
ascertained.
Rinse with warm water and dry all surfaces with
chamois leather.
Carefully clean the phonic wheels of the ABS in order
to ensure system efficiency. Do not use aggressive
products in order to avoid damaging the phonic
wheels and the sensors.
Pay special attention when cleaning the wheel rims
since they have parts in machined aluminium; clean
and dry them every time you use the vehicle.
Important
Do not wash your motorcycle right after use.
When the motorcycle is still hot, water drops will
evaporate faster and spot hot surfaces.
Never clean the motorcycle using hot or high-
pressure water jets.
Cleaning the motorcycle with a high pressure water
jet may lead to seizure or serious faults in forks,
wheel hubs, electric system, headlight (fogging),
fork seals, air inlets or exhaust silencers, with
consequent loss of compliance with the safety
requirements.
Clean off stubborn dirt or exceeding grease from
engine parts using a degreasing agent. Be sure to
avoid contact with drive parts (chain, sprockets, etc.).
Note
Do not use sponges with abrasive parts or steel
wool: only use soft cloths.
Attention
Braking performance may be impaired
immediately after washing the motorcycle. Never
grease or lubricate the brake discs to avoid losing
braking power. Clean the discs with an oil-free
solvent.
244