Ducati Scrambler 1100 Pro 2020 Скачать руководство пользователя страница 50

Страница: 50 / 246

The following table indicates the most suitable level of DTC intervention for the various riding modes as well

as the default settings in the "Riding Mode" that can be selected by the rider.

DTC

RIDING MODE

USE

DEFAULT

SPORT

This level is designed for sport use for

medium-expert riders, both on track

and road, with good grip conditions.

System permits sliding sideways.

TOURING

This level is designed for road use, with

good grip conditions. System permits

sliding sideways.

It is the default level for the

"ACTIVE" Riding Mode

SAFE & STABLE

This level is designed for road use, un‐

der all riding conditions on dry road.

System does not permit sliding side‐

ways.

It is the default level for the

"JOURNEY" and "CITY" Riding

Modes

RAIN

This level is designed for road use,

when surface is wet and very slippery.

ENGINE LOW setting recommended.

Содержание Scrambler 1100 Pro 2020























































































































































































































































Результаты поиска

Содержание Scrambler 1100 Pro 2020

Отзывы:

Ducati Scrambler 1100 Pro 2020, Руководство пользователя, Страница: 50 / 246

Результаты поиска

Содержание Scrambler 1100 Pro 2020

Отзывы: