Ducati SBK848 EVO 2011, Руководство пользователя

Страница: 29 / 119

28
E
LAP Memory display
Displays the data saved using the LAP function: lap time,
MAX speed and MAX rpm.
To display the saved lap times, go into the menu and select
the “LAP MEM” page.
Holding switch (1, fig. 8) pressed in position B “
▼
“ for 3
seconds in this menu page accesses the “1st lap“ view
mode. The display will show the lap number, lap time, MAX
speed and the MAX rpm reached for the lap in question.
Press switch (1, fig. 8) in position B “
▼
“ repeatedly to scroll
through the 30 laps stored until returning to the 1st lap.
If you press switch (1, fig. 8) in position B “
▼
“ for 3 seconds
while the saved times are displayed, the display immediately
resets all the saved times; In this case, if the LAP function
was active, it is switched off automatically.
The MAX speed saved is the maximum speed indicated on
the display in Lap function.
If MAX speed reading exceeds 299 Km/h (186 mph) while
the information is stored, speed reading is displayed
(example: 316 Km/h).
If there is no reading in the memory, the 30 times are shown,
with the display showing “00.00.00”, MAX rpm = 0 and
MAX speed = 0.
If the engine reached one of the two thresholds before the
limiter or the limiter threshold during a lap, the corresponding
lights (10, fig. 4) come on while viewing stored lap times.
A
B
B
A
A
A
B
B x 19
B x 19
fig. 21
B = ON for 3 secs.
Resets lap times
in memory
ProCarManuals.com