Ducati PRO-II PLUS, Руководство пользователя

Страница: 6 / 388

04
2. Quick-start guide
• When the scooter begins to move, place both feet on the footplate and press the
accelerator.
• To drive the scooter, tilt your body in the direction of travel when turning and slowly
turn the handlebars.
• To stop the scooter, release the accelerator and press the electronic or lever brake on
the left side of the handlebar.
• To dismount, first stop the scooter completely. Trying to get off the scooter while it is in
motion can cause injury.
• When you want to change speed mode, double click on the on/off button (button B in
chapter 5).
• When driving at night or in dark places, double click the button to turn on the lights,
and wear a reflective vest.ò
For your own safety, wear a helmet and knee pads to protect yourself against falls and
injuries while learning to ride the electric scooter.
The rider assumes all risks for not wearing a helmet or other protective gear.
The accelerator is activated once the forward speed exceeds 3 km/h.
For safety reasons, the scooter is initially set up to avoid a standing start.
NOTICE
• Before using the scooter for the first time, fully charge the battery.
• Press the power button for a few seconds to start it.
• Check the tyre pressure (50PSI); if the scooter does not reach at least 60% of the
declared Km or does not reach the maximum speed within the first 3 months of use, it is
likely that the wheels have deflated again. In this case, restore the pressure as indicated.
•
Place the scooter on a flat surface
• Place your hands on the handlebars. Step onto the footrest with one foot and use the
other to give yourself a gentle push and accelerate.
•
After use, check the battery indicator. If the battery is out of power, recharge it before
use. The electric scooter is a device that requires periodic recharging.