Ducati MULTISTRADA 950 Скачать руководство пользователя страница 192

Страница: 192 / 293

Tank filler plug

Opening

Lift flap (1) and insert the active or passive key in the

lock. Turn the key clockwise by 1/4 of a turn to release

the lock.

Lift the plug (2).

Closing

Close the plug (2) with the key inserted and push it

down into its seat. Remove the key and close flap (1)

protecting the lock.

Note

Plug can only be closed when key is inserted.

Attention

After refuelling, always make sure that the plug

is perfectly in place and closed.

Electric filler plug opening (option)

The electric plug (2, Fig 144) opens after every key-

off for 60 seconds, after working lever (1, Fig 143)

present on plug.

Fig 143

Fig 144

191

Содержание MULTISTRADA 950






































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 950

Отзывы:

Ducati MULTISTRADA 950, Руководство пользователя, Страница: 192 / 293

Результаты поиска

Содержание MULTISTRADA 950

Отзывы: