manualshive.com logo in svg

Ducati MULTISTRADA 1260, Руководство пользователя

Поделиться
Скачать
Ducati MULTISTRADA 1260 Скачать руководство пользователя страница 298

Side stand

Important

Place the motorcycle on the side stand only

when you are not going to use it for short periods of

time. Before lowering the side stand, make sure that

the bearing surface is hard and flat.

Do not park on soft or pebbled ground or on asphalt

melt by the sun heat and similar or the motorcycle

may fall over. When parking in downhill road tracts,

always park the motorcycle with its rear wheel facing

downhill.

To pull down the side stand, hold the motorcycle

handlebar with both hands and push down on the side

stand (1) with your foot until it is fully extended. Tilt

the motorcycle until the side stand is resting on the

ground.

To move the side stand to its rest position (horizontal

position), lean the motorcycle to the right while lifting

the thrust arm (1) with your foot.

To ensure trouble-free operation of the side stand

joint, thoroughly clean it and then use SHELL Alvania

R3 grease to lubricate all friction points.

Warning

Do not sit on the motorcycle when it is

supported on the side stand.

Note

Check for proper operation of the stand

mechanism (two springs, one into the other) and the

safety sensor (2) at regular intervals.

1

2

Fig. 250

297

Содержание MULTISTRADA 1260










































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды