manualshive.com logo in svg

Ducati Multistrada 1200 ABS, Руководство пользователя, Страница: 26 / 199

Поделиться
Скачать
Ducati Multistrada 1200 ABS Скачать руководство пользователя страница 26

25

E

Warning indication (Alarms/Signals)

The instrument panel shows some signals/malfunctions in 
real time on the circular “Dot-Matrix” display (B, fig. 19) that 
are not dangerous for correct vehicle operation.
At Key-On (at the end of the check) one or more “warnings” 
are displayed if they are active.
If a “warning” is activated during operation, the current 
indication on the circular “Dot-Matrix” display (B, fig. 19) will 
switch automatically to the indicator.
If there are multiple indicators, they will scroll automatically 
every 3 seconds. 

Note

No signal lights turn on if one or more “warnings” are 

activated.

The following “warnings” could be displayed:
-

Battery level;

-

Traction control;

-

Hands free key;

-

Hands free key battery level;

-

Coolant temperature;

-

Steering release error.

When one or more “warnings” are active, it is possible to go 
to other functions by pushing button (2, fig. 7) “

▼

”.

GEAR

DDA

LAP

B

fig. 19

Содержание Multistrada 1200 ABS








































































































































































































Отзывы:

Нет отзывов