Ducasa Sunrise Eco-Pro SR03D-EP, Руководство пользователя, Страница: 5 / 16

min. 75mm
min. 150mm
d = min. 10mm
s
s<40mm. → d=min 10mm
min. 75mm
min. 150mm
d = min. 200mm
s
s>40mm. → d=min 200mm
if shelf (s) is less than 40mm.
minimum distance(d) from heater 10mm.
if shelf (s) is more than 40mm.
minimum distance(d) from heater 200mm.
centres for
screw hooks
‘L’ Shaped Bracket
895mm.
5
INSTALLATION
Select a suitable position on a wall, near to a mains power socket (but not directly below it) making sure
there is at least 75mm below and 10mm above the heater of unobstructed space if the window sill protrudes
less than 40mm. If the sill protrudes more than 40mm then space required above is 200 mm.”
Fix the two screw hooks to the wall at measured centres of 895mm.
Locate the appliance over the top of the screw hooks and allow it to hang in place.
Fit the bottom ‘L’ shaped bracket onto the wall and then secure the heater by screwing the small screw
directly into the underside of the grill.
The cable comes out from the right hand side of the heater and measures approximately 1.6m.
USING THE HEATER
Before switching on, ensure that all packaging items are removed and that the heater is wall mounted
correctly otherwise damage may occur.
Plug in and switch on at wall socket.
The element has been coated with a protective film, which will burn off during the first few minutes and may
cause a small amount of fuming. This is quite normal – the fumes are non-toxic and will quickly disappear. We
recommend that you open a window to ventilate the room when using the heater for the first time.
You may notice some parts of the element appearing to be hotter from time to time because of the variable
airflow through the heater. This does not cause a safety hazard.
The heater grille may become discoloured with use – this is a caused by airborne pollution and is not a fault.