
15
PS: Press “Set” button, screen shows a flashing number for 5 seconds, after
which the appliance will return to standby.
(Appliance will keep the right time until power is cut off).
2. GENERAL USE
1. Turn the heater ON by pressing the
“
”
main button until the light is on. The
unit will blow cold air
and
“
” light is on.
2.
Pressing the “
” button, the unit will blow warm air and both “ ” and “
”
lights are on.
3.
Pressing the “
” button twice, the unit will blow hot air and both “
” and
“
” lights are on.
4.
Pressing the “
” button three times, the unit will blow cold air and “
” light
is on.
5.
Pressing the “
” button, the unit will set a timer from “01-24” and “ ” light
is on.”00” means the timer is off.
PS:
The control panel “
” button has the same function as the remote control
“
”
button.
3. 24H Timer FUNCTION
1. Turn the appliance on in working conditions (fan, warm, hot all work correctly).
Control panel “
” button and remote control “
” button have the same function.
2. Press “
” button, set the timer for up to 24 hours, keep pressing “
” button
to increase the hours from 00--24(00= off, 01= 1hour, 02= 2 hours... 24= 24 hours,
etc.) and the “ ” light is on.
PS:
Set as “00” means no set timer, the “ ” light is off.
4. THERMOSTAT INSTRUCTIONS
1. Turn the appliance on in working conditions (fan, warm, hot all work correctly).
This function is only available by using the remote control.
2. To adjust the temperature, press the “
” to set the desired temperature
between 10
℃
and 49
℃
.
Содержание M-59
Страница 31: ...31...