![Ducar DM40P Скачать руководство пользователя страница 54](http://html1.mh-extra.com/html/ducar/dm40p/dm40p_manual_2537495054.webp)
Original Instructions
Filling with engine fuel
As shown in Fig 1
o
CAUTION
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol.
CAUTION
Do not fill into the base of neck to allow for fuel expansion. Do not
overfill the fuel tank.
CAUTION WARNING
Petrol is highly flammable and extreme precaution must be
taken when handling or working with it. Keep out of reach of children.
CAUTION
To prevent engine damage the engine is shipped without oil or petrol.
The engine must be filled with the correct grade of oil and petrol before starting the
engine.
WARNING
Refuel in a well-ventilated area with the engine stopped. Do not smoke
or allow flame or sparks in the area where the engine is refueled or where petrol is
stored. Avoid repeated or prolonged contact with skin or inhalation of vapour
11. Clean the area around the petrol filler cap
before removing the cap. Remove the warning tag,
check the fuel level.
12. Refill the tank if the fuel level is low.
13. Refuel carefully to avoid overfilling or spilling fuel.
There should be no fuel in the filler neck.
14. Clean up any overflow or splashes of petrol before
starting the engine.
15. Tighten the filler cap after filling, finger tight on.
ADJUSTMENT
Setting the cutting height
As shown in Fig 11
CAUTION
Adjust the cutting height only When
the engine is switch off the spark plug Boot has
been pulled.
You can adjust the cutting height of the machine
according to the following methods, the cutting height is
30-65mm.
12
Fig 10
Fuel filler neck
Fig ll