(futaba) and set throttle trim to zero. Set throttle EPA to 100% and
turn off ABS function.
Second Step :
Connect battery to ESC. Then while holding down red
set key on power switch turn the ESC on. The Red light will blink
immediately and the motor will tweet, ESC is now in throttle
calibration mode and you can release set button.
Third Step:
With throttle trigger at neutral position press the set
、
button once to record neutral position. Green light will flash indicating
successful recording.
Fully depress throttle trigger and press the set button once to record
full throttle position. Green light will flash twice indicating successful
recording
．
With trigger at full brake/reverse press the set button once
to record full brake/reverse position. Green light will flash 3 times
indicating successful recording.
Fourth Step:
After 3 seconds the ESC will go into operation mode.
●
Running Programming
Differing from throttle calibration, running programming operates
entirely through the ESC itself, and does not need the involvement of
the transmitter. In order to ensure security, the transmitter is
indicating you have entered into the setting item, then you can
change the value. If you have not chosen any item by the last
flashing, the ESC will quit the programming mode automatically.
How to check the current value of the setting items?
After entering into the setting item, the times of green light flashes
first time represents the current setting value, then the green light will
flash circularly to indicate different setting values.
How to change the value of setting items?
When you see the times of green light flashes for your desired
settings, press the SET button, and the value is automatically saved.
Meantime return to setting options, the green light will be off, and the
red light starts flashing.
How to quit from the running programming mode?
Wait for the red light to flash the last setting item and the ESC will
automatically quit from programming mode. Or, you can simply switch
off and then switch on to return to operation mode.
Note: when the red and green light flashes, the motor will tweet
synchronously.
suggested to be ON (but not used/controls not moved).
How to enter the mode of Running Programming?
Turn on the ESC, allow it enter the operation mode, then press the
SET button and hold it more than 3 seconds. The red light starts
flashing, indicating that the ESC has entered into the running
programming mode.
How to choose the setting item?
Under programming mode, red light flashing means the setting item,
flash one time, on behalf of Item1; flash two times, on behalf of Item2,
and so on. Red light will flash in turn automatically to indicate different
setting items. When you see the setting item you want to enter, press
the SET button, the red light is off, the green light starts flashing,
8. Meaning of setting items
D
2
RP – Dualsky Digital Racing Profiles
Operating parameters are composed of the throttle curve, start mode
and timing advance. We need to consider the applied situation and
power system features to arrange them accordingly. It is sometimes
difficult and time-consuming for users to determine these settings.
Dualsky joined with top drivers and have done extensive testing in
many different conditions, and these settings are shown as D
2
RP, and
are very easy to use and understand (see the table below). Of course,
advanced racers can make their own settings that may be more
suitable using the optional Dualsky USB LINK.
8
9