DualLite LiteGear, Руководство по установке, Страница: 10 / 16

10
200. Status Indicators
200.1 Indicators Provided
The LiteGear system is equipped with two LED indicators:
200.2 Unusual Circumstances
If an abnormal condition is detected, please contact the local Hubbell Lighting, Inc. Factory Authorized Service Center,
or call 1-800-848-6439 for assistance. Do not attempt to make repairs; the system is fed from more than one power
source and extreme care must be taken before servicing.
201. Spectron® Self-Testing/Self-Diagnostic Option
201.1 Description and Operation
Models equipped with the Spectron® self-testing/self-diagnostic circuitry provide:
• Visual indication of AC power status
• Visual indication of self-diagnostic test cycle
• Visual indication of any unit malfunction including -
• Battery fault
• Charger fault
• Transfer fault
• Lamp/no load fault
Spectron® equipped units also include:
• Time Delay Retransfer - upon return of normal AC power, unit will remain in emergency operation for an additional
15 minutes to allow AC power to normalize.
Note - Once normal AC power has returned Time Delay Retransfer can be overridden by pressing the test switch.
LED Status Indicator - bi-color green/red LED:
• Green Status Indicator - During normal operation, the green status LED will be constantly illuminated, indicating the
presence of AC power. During all automatic or manual self-test cycles, the green status LED will blink indicating test in
progress.
• Red Status Indicator - If a fault condition is detected during any automatic or manual self-test cycle, the test in
progress will be terminated and the red status indicator will provide the proper “service alert code”. When multiple
failures are detected during a test (example - battery fault and lamp failure), the service alert code displayed at the
end of the test cycle will be the first one detected in the order listed below for ‘Service Alert Code’.
Manual Tests:
• Press the test switch once to initiate a 1-minute duration test
• Press the test button a second time to initiate a 90-minute duration test
• Press the test button a third time to end test routine
LED Display System Mode Reason
None Off • No AC power
• Low Voltage Battery Disconnect circuit activated following extended power outage
• Batteries disconnected
Amber Inverter-ON • Test
• Loss of utility
Green(solid or
blinking)
AC-ON and
Charging
• Utility applied, branch feeder circuit breaker energized