7
FROTHING MILK
Use the frothing attachment to create a dense and creamy
froth for topping your cappuccinos or livening up your instant coffees.
Pour milk into the jug
between the minimum mark
and the 150ml mark.
DO NOT FILL ABOVE
THE 150ML MARK.
Hold the spindle tight and
screw the frothing
attachment on clockwise, or
vice versa to remove.
Push the ON button to start
frothing.This will take
60 - 75 seconds. When
frothed the neon will go out
and the Latteccino will stop.
1
2
5
3
4
FILL WITH MILK
SCREW ON
TURN ON
ATTACH LID
To open, rotate the lid
anti-clockwise and lift.
Pour the frothed milk on
your coffee and serve.
6
OPEN & SERVE
Place the lid on the jug and
rotate clockwise until the
two arrows meet and the
lid is locked in place.
IMMEDIATELY
rinse with
warm soapy water and wipe
clean after
EACH
use. Before
making the next round of
milk froth wait 2 minutes.
CLEAN AFTER USE
6
KNOW YOUR LATTECCINO
3. L
ID WITH SPINDLE
4. C
ORDLESS JUG WITH
NON STICK COATING
2. A
TTACHMENT
FOR HEATING MILK
1. A
TTACHMENT
FOR FROTHING MILK
All illustrations are for representation only,
your model may vary from illustrations shown.
5. O
N BUTTON
WITH POWER NEON
6. P
OWERBASE
WITH CORD TIDY
latteccino_ib_03.04.08.qxp 07/04/2009 16:18 Page 6
