20
21
4
5
8
7
Turn the Steam Flow
Control Knob anticlockwise
to open the valve, keeping
the Froth Nozzle just under
the surface of the milk. Take
care not to splash the milk.
Caution: Never allow
the milk to boil. Risk of
scalding.
Flush the Steam Wand
by dispensing hot water
or steam to remove milk
residue from inside Steam
Wand. Wipe the Steam
Wand with a damp cloth.
Product failure due to
build-up of milk residue
is not covered by your
guarantee.
FROTHING
PRIMING
CLEANING
STEAM FLOW
CONTROL KNOB
The milk will swirl in the
Jug. If large bubbles form,
the Froth Nozzle is not
sufficiently submerged in
the milk.
Caution: Never
allow the milk to boil.
Risk of scalding.
At the end of your steaming
cycle, the Boiler must be
primed before making coffee
or using the Steam Function
again. Follow Priming
instructions on page 12.
6
Step 1:
Once milk reaches
optimum temperature/forms
desired amount of froth,
turn Steam Flow Control
Knob clockwise.
Step 2:
Turn Function
Selector Knob to ‘Off’.
Ensure steam is off before
removing Steam Wand from
Jug. Pour immediately.
Risk
of scalding.
STEAMING/
FROTHING
1
2
CLEAN FILTER
CLEANING – AFTER USE
1
4
2
5
3
6
Turn the Filter Holder
upside down over a bin and
knock out the grounds. Be
careful not to throw away
the Cup Filter.
Remove the Grouphead Heat
Shield and use a damp cloth
to clean the Steam Wand,
Grouphead, Grouphead Heat
Shield and Showerhead. There
should be no milk residue or
coffee grounds visible. Then
reinstall the Grouphead Heat
Shield.
Empty the Drip Tray
regularly. Rinse the Drip
Tray Cover after each use.
Ensure that the Froth
Nozzle is cool before
cleaning. Pull the Froth
Nozzle off the Steam Wand
and wash under running
water to remove any milk
residue.
Risk of burns.
Top up the Water Tank
with fresh water after
making coffee, steaming or
frothing milk.
DRIP TRAY
FLUSH STEAM
WAND
RINSE FROTH
NOZZLE
WATER TANK
WIPE
IMPORTANT NOTICE: After
each use, flush the Steam
Wand by dispensing water
(see page 18 for instructions),
this will remove any milk
residue from inside the Steam
Wand and prevent blockages.
Risk of scalding.
CLEANING – AFTER USE
BEFORE CLEANING, ENSURE THAT THE APPLIANCE IS
SWITCHED OFF, UNPLUGGED AND ALLOWED TO COOL.
GROUPHEAD AND FILTER HOLDER TAKE A LONG TIME TO
COOL.
Risk of electric shock, burns and scalding.
Do not wash
any of the plastic accessories or Filter Holder in the dishwasher.
U
N
P
L
U
G
W
H EN N
O
T
I
N
U
S
E
SW
ITC
H OFF
&
