16
17
1
2
Remove the froth nozzle
from the steam wand.
Caution: Wand may be
hot
. Ensure the water tank
is filled with water.
Insert into a deep jug or
teapot and point the wand
to a side wall to reduce
splashing.
3
Turn the flow control knob
to the steam/water position.
It will start with a continuous
flow then start to pulse. This
is normal.
4
5
The flow of water can be
adjusted by turning the
control knob between the
‘off’ and the ‘steam/water’
position.
To stop the flow, turn the
flow control knob to the
‘off’ position. Be careful not
to overtighten. Unplug when
not in use.
DISPENSING HOT WATER
CAUTION: WATER WILL BE HOT AND BE DISPENSED
AT HIGH PRESSURE. SUBMERGE THE WAND TO
REDUCE SPLASHING.
START DISPENSING
STOP DISPENSING
INSERT WAND
ADJUST FLOW
PREPARE
U
N
PL
U
G
W
HEN N
OT
IN
U
SE
Turn machine off by pressing
ON/OFF button after you
have rinsed through and
finished using the machine.
This will save energy.
6
TURN OFF
1
2
If the machine is left idle
for 30 minutes, it will enter
standby mode. The auto
dosing buttons illumination
will turn off along with the
thermoblock heater, to save
energy.
Press button ‘ON’. The auto
dosing buttons will flash. The
thermobloc is now heating
the water.
3
The auto dosing buttons
will turn solid once the
temperature is correct for
extraction.
STANDBY MODE
WAIT 40 SECONDS
TURN ON
STANDBY
DON’T FORGET
TO
REGISTER
YOUR PRODUCT
WWW.DUALIT.COM/REGISTER
OR BY POST
