12
13
BEEP!
4
5
Repeatedly touch the Dry
Function Button to scroll
through to your preferred time
and whether you would like to
Dry or Deodorise your items,
refer to the function & program
chart on page 11. The inside of
the UV Steriliser will illuminate
red.
When the function ends the
UV Steriliser will beep once
and the interior light turns
off.
Open the door and remove
your products. Unplug the
UV Steriliser when not in
use, then follow cleaning
instructions on Page 15.
6
1
Only place clean items into
the product. Wash dirty
items with warm soapy
water.
2
3
Always shake off excess
water from washed
products before placing
in the UV Steriliser. Tip:
Efficiency decreases if there
is residual moisture in the
product.
Place items upright, do not
stack. Ensure larger items
do not cover or block the
circulation vents. Place
bottle teats upside down in
the round rings installed on
the Upper Rack.
USING DRY FUNCTION
This function
DOES NOT STERILISE.
Due to this, items can
be removed or replaced mid-cycle. The countdown will continue once
the door is shut. For sterilisation use either UV or UV and Dry.
U
N
PL
U
G
WH
EN NO
T IN
U
SE
x1 15 mins Dry
x2 20 mins Dry
x3 10 mins Deodorise Only
6
Open the door and remove
your products. Unplug the
UV Steriliser when not in
use, then follow cleaning
instructions on page 15.
BEEP!
4
5
Repeatedly touch the UV
Function Button to scroll
through to your preferred
time, if using both racks
ensure you select the longer
time, refer to the function
& program chart on page
11. The inside of the UV
Steriliser will illuminate Blue.
When the cycle ends the
UV Steriliser will beep once
and the interior light turns
off. Items will remain sterile
for up to 24 hours as long
as you do not open the
door.
1
Only place clean items into
the product. Wash dirty
items with warm soapy water
and dry thoroughly before
sterilising. Tip: Efficiency
decreases if there is residual
moisture in the product.
2
3
Place bottles or cups upright,
facing the UV light.
Warning:
Do not stack. Items need
to be exposed to the UV
light to sterilise.
Ensure
larger items do not cover or
block the circulation vents.
Place bottle teats upside
down in the round rings
installed on the Upper
Rack. This increases the
sterilisation efficiency. Plug
in the UV Steriliser to the
mains.
USING UV FUNCTION
Do not open the door mid-cycle as items will not be sterilised. If you need to add or remove
an item, cancel the cycle and start it again.
Before using this function check UV-C Bulbs are working by pressing UV Button. Both Bulbs
should glow and the Chamber will illuminate Blue, press UV twice to end cycle.
x1
15 mins
x2
25 mins
x3
End Cycle
