Unpack the unit and components from
the box.
REMOVE ALL VISIBLE PACKING
MATERIAL, AND THOSE FROM
INSIDE THE COOKING CHAMBER.
Inside the box you should have:
•
Main body
•
Crumb tray
•
Off load chute
•
Instruction manual.
If any damage is discovered or my parts
missing, contact place of purchase.
In the interest of improving products, Dualit Ltd. reserves the
right to change product specification without prior notice
.
This model is rated 4.1Kw and is
to be permanently connected to fixed
wiring. This machine must be installed by
a qualified electrician.
CONNECTION PARTS WILL BE
REQUIRED. THIS MODEL MUST NOT
BE OPERATED FROM A 13 AMP PLUG.
This models power must be supplied via
an 20A all pole isolator which provides full
disconnection under overvoltage category
III conditions. If a power supply cord is to
be used, it shall be at least 2.5mm
2
H05RN-F.
IN THE BOX
INSTALLATION
3
These models are rated below 3kW and
are connected to a normal 13 Amp, 3-pin
plug. If a moulded-on plug is not fitted or
has been removed, the new plug should
be fitted and wired accordingly.
Connect the green/yellow wire to the
terminal and the plug marked “E”
(EARTH) or by the earth symbol, or
coloured green or green/yellow. Connect
the blue wire to the terminal marked “N”
(NEUTRAL) or coloured black. Connect
the brown to the terminal marked “L”
(LIVE) or colour red.
MODEL DCTT 1 & 2
MODEL DCTT 3
Do not place on surfaces or near walls, partitions or kitchen furniture and the
like - unless they are made of non-combustible material or clad with non-combustible
heat-insulating material, and pay special attention to fire prevention regulations.
Allow ample clearance around the conveyor, minimum of 80mm at rear and 30mm
at the sides. This ensures air can circulate around the conveyor and keep the machine
at the optimum operating temperature.
dctt manual 2008.03.07.qxp 11/06/2008 11:52 Page 3
