16
17
TROUBLESHOOTING
POSSIBLE CAUSE(S)
SOLUTION(S)
MY MACHINE IS MAKING A LOUD WHISTLING NOISE WHILST PRE-HEATING
1. The machine is pumping water through
the system at high pressure.
1. This is normal operation.
AFTER FROTHING MILK, MY MILK IS NOT FOAMY
1. Your milk is not cold or fresh enough.
1. It is easier to make froth using fresh, cold
semi-skimmed milk.
2. The Steam Wand is blocked with milk
residue.
2. Clean Steam Wand and Nozzle and descale
machine (see page 12-15). If you are unable to
unblock your Steam Wand then contact Dualit
on 01293 652500 for advice or spare parts.
3. My milk is burning.
3. Reduce steam flow, rotate Steam Valve
clockwise between the steam and off position
(see page 10-11) or steam for a shorter period.
NO STEAM OR REDUCED STEAM IS FLOWING FROM THE STEAM WAND
1. Steam wand is blocked with milk
residue.
1. Clean steam wand and nozzle and descale
machine (see page 12-15). If you are unable to
unblock your steam wand then contact Dualit
on 01293 652500 for advice or spare parts.
2. The machine has been turned on with
the steam valve left open.
2. Close the steam valve and open again to
steam.
3. The machine has not been descaled
in the recommended time. The Indicator
Light has illuminated
RED
. The machine
has entered Lock Mode.
3. Complete Descale procedure.
(See Page 12-15)
UNSURE WHAT THE INDICATOR LIGHT COLOUR MEANS
RED
and
AMBER
illumination: (Flashing):
1.1 Low water level Indicator. Add a minimum
of 500ml to the Water Filter Holder.
1.2. The Water Tank is not correctly seated into
position.
Press firmly on the Water Tank to locate.
The Water Tank will sit flush with the top
surface of the machine when the Water Tank is
fitted correctly.
GREEN
illumination: (Flashing / Solid):
Machine is warming up to operating
temperature. Once Green illumination is solid,
the machine is ready to use.
AMBER
illumination: (Flashing / Solid):
Descale required and machine is warming up to
operating temperature.
Recommended to carry out descale procedure
soon otherwise the machine will shortly enter
Lock Mode. (See Page 12-15)
TO REPLACE FUSE,
REMOVE SILVER LABEL
TO ACCESS SCREW.
RED
illumination: (Flashing / Solid):
Lock Mode. Complete Descale procedure.
(See Page 12-15)
RED
illumination: (Quick flash):
Machine is in Descale Mode, to exit, press the
Descale Button for 5 seconds.
DRIP TRAY FILLING TOO QUICKLY
Each time the Steam Valve is closed,
Steam and Water is purged through
the machine and expels from out of the
Outlet. This is to increase the machines
life.
This is normal operation.
STEAM SPEED IS TOO HIGH
Steam Valve is fully open.
Turn the Steam Valve clockwise to reduce the
flow.
I HAVE RUN OUT OF DUALIT WATER FILTERS
To purchase more Dualit Water Filters visit our website on www.dualit.com/waterfilters
or
Contact Dualit on 01293 652500.
MY MACHINE IS NOT WORKING – THE LIGHTS ARE OFF AND THE MACHINE
CEASES TO OPERATE.
Machine not plugged in
Ensure the machine’s plug is connected to the
socket, and socket switch turned on.
Fuse may have failed.
Check and replace fuse. Contact the Dualit
customer helpline on 01293 652500.
Содержание Cino
Страница 1: ...Milk Steamer Instruction Manual Guarantee...
