TOASTING BREAD
The toasting control senses and adjusts the level of browning to make consistently even toast.
You will quickly get to know where to set the ‘Toasting control’ for your particular bread.
Plug the toaster into the wall
power socket and turn
power on at socket.
C
Set to snowflake to defrost,
1 for light, 2 for medium & 3
for dark toast. The black dot
is a guide setting for fresh
medium sliced white bread.
1
2
PLUG IN
SET CONTROL
3
Place the bread into the
slots and press the toasting
lever down until it engages.
INSERT & ENGAGE
You can CANCEL toasting
manually at any time by
lifting the toasting lever.
When the toasting cycle is
complete the slices will pop
up automatically and are
ready for removal from the
slots.
4
5
STOP TOASTING
EJECT
•
FULLY LOAD ALL HEATED UP SLOTS
.
If a slot is heated but no bread is
inserted, the bread in the adjacent slot will toast unevenly.
•
DIFFERENT BREADS WILL TOAST AT DIFFERENT RATES,
wholemeal
bread take longer than white bread, fresh bread will take longer than day old bread.
Remember to adjust your browning control to allow for your particular type of bread.
• The thickest slice of bread that will fit in your toaster is 30 mm thick. Bread
which is too thick may get stuck if forced into the slots.
• When hand cutting a fresh loaf, cut the slices as evenly as possible. Uneven slices will
toast unevenly.
• Keep elements free from breadcrumbs and broken pieces of bread. If left these may
burn out the elements. With the toaster unplugged use a soft brush to clean inside
your toaster, do not use a knife!
• Cancel toasting manually at any time by lifting the ejector lever.
9
TOASTING TIPS
Here are a few tips to help get the best out of your toaster.
8
IB-DCP4-A_14.02.11_Layout 1 14/02/2011 12:52 Page 8
