10
Document Version: 1.10
DE-960 User Manual
6 Operation & Usage
1. Once input power to device, white LED on KEY pad is turned on and off, after that,
BLUE & RED LED are turned on.
2. When user present authorized contactless card to the reader, the reader makes 1 time
beep sound and 2 times of turning RED LED. It sends card’s data to access controller
through Wiegand data line.
3. When an unauthorized card is presented on the reader, RED LED will be blinking.
4. Tamper (TAMP) :
Reader makes alarm when its CASE is forced to open. It also makes TAMPER signal
to access controller. In case of closed CASE, TAMPER line (Sky-Blue Line) shows 0V
and otherwise (open) shows 5V.
5. LED Control :
Reader turns on RED LED when LED Signal (PINK) with 0V. In case of 5V, BLUE LED
will be on.
6. Buzzer Control :
Reader makes beep sound when BEEP Signal(BROWN) with 0V.
5V
GND
BUZZER OFF
BUZZER ON
BUZZER OFF
5V
GND
RED LED ON
BLUE LED OFF
RED LED OFF
BLUE LED ON
5V
GND
CASE CLOSE
CASE OPEN
CASE CLOSE
