XGPS170D
5
Controls and Indicators
Please refer to the diagram above to locate the
controls and indicators on the XGPS170D.
LED brightness control.
Use this switch to ad-
just the brightness of the LEDs on the front of the
device.
USB connector.
The USB connection is used to
recharge the XGPS170D.
Power switch
. Slide the power switch from “OFF”
to the “ADS-B” position to receive both GPS and
ADS-B signals. If you only need GPS information,
slide the switch to the middle position, “GPS”.
Battery/Charging status light
. This light will flash
red when the battery level is low and the device
requires recharging. (See
Charging
on page 15.)
During charging, the light will glow solid red and it
USB connector
Power switch
Battery/Charging status
GPS status
Bluetooth status
ADS-B status
ADS-B antenna
LED brightness control
GPS antenna