Dual XDMA7650, Инструкция по установке и эксплуатации

Страница: 8 / 28

8
XDMA7650 OPERATION
Press AUDIO momentarily to select between Bass, Treble,
Balance, Fader, EQ, Subwoofer and Source Volume Level.
Press AUDIO until BASS appears then rotate volume knob
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until TREBLE appears then rotate volume knob
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until BAL appears then rotate volume knob
left/right to adjust (BAL LEFT 12 - BAL RIGHT 12).
BAL EVEN represents equal balance
Press AUDIO until FADER appears then rotate volume knob
left/right to adjust (FADER FRONT 12 - FADER REAR 12).
FAD EVEN represents equal fader
Press AUDIO until EQ appears. Rotate the volume knob left/
right to select between FLAT (default), POP, JAZZ, CLASSIC,
BEAT, ROCK and USER equalization curves. Press SELECT
to confirm. Any manual adjustment to the Bass or Treble
settings are automatically saved as USER.
Press AUDIO until SUB appears then rotate volume knob
left/right to adjust (0 minimum / +12 maximum).
* Note: Subwoofer option will not appear if disabled in the
setup menu. Refer to page 7 for details.
The source volume level control allows a gain adjustment
for each audio source: AM, FM, CD, AUX, USB and operation
of iPod. Set the source volume level for each mode,
depending on the relative volume of each audio source.
To set the source volume level, press AUDIO until SRC
LEVEL appears. After one second, the current mode will
appear on the display. Turn the volume knob to adjust
the audio level of the current source (-6 m6
maximum).
Note: Only the current mode will be available for
adjustment. To adjust another mode of operation, press
SOURCE until the desired mode is selected, then set the
source volume level for that mode.
Audio
Bass
Treble
Balance
Fader
EQ
Subwoofer
Source Volume Level
General Operation
BASS TREBLE BALANCE FADER EQ SUBWOOFER* SOURCE LEVEL