
AMP
YELLOW Auxiliary Input
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
RCA Cable
(sold separately)
BLUE
Antenna Connector
Rear Preamp Output
Connect to amplifier RCA Input
GREY
Ground
Connect to vehicle
chassis ground.
BLACK
Accessory
Connect to existing ignition
circuit or switched 12 volt source.
RED
Memory
Connect to battery
circuit or constant 12 volt source.
Right Front
Gray/Black (-)
Gray (+)
Left Front
White/Black (-)
White (+)
Right Rear
Violet/Black (-)
Violet (+)
Left Rear
Green/Black (-)
Green (+)
YELLOW
3
XDM6800
INSTALLATION
Wiring Diagram
FUSE
When replacing a fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage radio.
The XDM6800 uses one
10 amp ATO fuse located
below wiring connector.