5
XDM270
OPERATION
Press
RELEASE
and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Press or any other button (except
EJECT
) to turn the unit
on. Press to turn the unit off.
Press
MODE
to select between AM/FM, CD player, auxiliary
and USB. Modes of operation are shown in the display.
NOTE
: CD and USB modes will not appear unless a CD is
inserted or USB device is connected.
The XDM270 offers a 3.5 mm auxiliary input port on the front
panel of the unit for connecting an audio device, MP3 player,
etc. Press
MODE
to select auxiliary input mode.
Adjust volume using volume knob (00-46).
Press
DISP
to show the clock. During playback of MP3/files,
ID3 tag information, elapsed time, track number and file/
folder names will automatically rotate on the display.
Press
RESET
upon initial installation or if abnormal
operation occurs. Reset button is located behind the front
panel.
With the unit on, press and hold
DISP
until the clock begins
to flash, then release. Turn the
volume knob
to the right to
adjust the hours or to the left to adjust the minutes.
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
Press and hold
AUDIO
for more than 3 seconds to access the
setup menu. Press
AUDIO
momentarily to select between
the menu functions and rotate the
volume knob
left/right to
adjust or activate the desired function.
Faceplate Removal
Power On/Off
Mode
Auxiliary Input
Volume
Display
Reset
Set the Clock
12/24-hour Clock
Setup Menu
General Operation
