Dual XD5210, Инструкция по установке и эксплуатации, Страница: 11 / 16

XD5210 OPERATION
11
Troubleshooting
Error Codes
Problem Cause Action
Unit will not
turn on
(no power)
Yellow or red wire not connected or
incorrect voltage Check connections for proper
voltage (11~16VDC)
Black wire not connected Check connection to ground
Fuse blown Replace fuse
Unit has power
(but no sound)
Speaker wires not connected Check connections at speakers
One or more speaker wires touching
each other or touching chassis
ground Insulate all bare speaker wires
from each other and chassis
ground
Unit blows
fuses
Yellow or red wire touching chassis
ground Check for pinched wire
Speaker wires touching chassis
ground Check for pinched wire
Incorrect fuse rating Use fuse with correct rating
Excessive
skipping
Unit is not mounted correctly or
backstrap is not secure Check mounting sleeve and
backstrap support
Physical defect in media
(CD, CD-R or CD-RW) Check media for scratches
Error Code Cause Action
ER01 appears on display High internal temperature Turn unit off for 1 hour
ER02 appears on display
Load/Eject operation error Press eject or RESET
ER03 appears on display Focus adjustment error Clean or replace media
ER04 appears on display
Tracking auto adjustment error Clean or replace media
ER06 appears on display Sled operation error Press eject or RESET
ER07 appears on display
Focus search operation error Press eject or RESET
ER08 appears on display CLV (PLL) operation error Press eject or RESET
ER09 appears on display
TOC data read error Clean or replace media