9
Primus Maximus V1.0-EN
Installation of Platter and Mat
Now you can place the platter (item
C
in the delivery content) carefully to the motor sub platter. It is
centered by the motor axle. The platter sits with its own weight on the motor platter and does not
need any fixture. Be careful, when you handle the heavy platter and do not drop it.
The platter mat (item
D
in the delivery content) can now be placed on top of the platter.
Installation of Counterweight
The counterweight (item
F
in the delivery content) must be installed at the backside rod of the
tonearm. By turning it, the position of the weight moves back and forth. Please refer picture below:
Installation of Hinges and Dust Cover
There are 2 hinge sockets at the rear side of the turntable (refer schematic of the top view in the
overview section). Here you can insert the 2 hinges (item
E
in the delivery content). Now you can
place the dust cover. It has 2 fixture slots at the rear side, which fit to the hinges.
Connection of Power Supply
Important: Please do only use the correct power supply unit (item
G
in the delivery content)!
The power supply has its own housing and can be placed separately. The DC jack of the power supply
must be connected to the DC input at the backside of the turntable. Refer to the schematic of the
back view in the overview section.
Now you can connect the mains cable (item
H
in the delivery content) to the power supply. The
mains connector of the cable can now be inserted to a mains socket in your room.
