SiriusXM Satellite Radio Operation
®
11
MXD378SXM
OPERATION
Channel number can be chosen directly as below.
Step #1 : Press and hold the volume knob.
Step #2 : Rotate the volume knob left or right to select the first digit of
the channel number. Example: CH2
Step #3 : Press the Channel Up button then rotate the volume knob left
or right to select the second digit of the channel number.
Example: CH25
Step #4 : Repeat Step #3 to select the third digit of the channel number.
Example: CH256 Then press the volume knob to tune to the
desired channel.
Step #1 : Long press volume knob then release and immediately press
the BAND/DISP button to enter the pass code screen to
access Mature Parental Control.
Step #2 : Rotate the volume knob left or right to select the first digit of
the pass code number, (Default Pass Code is 0000)
Step #3 : Press the Channel Up button then rotate the volume knob left
or right to select the second digit of the pass code.
Step #4 : Repeat Step # 3 to enter the third and fourth digit of the pass
code then press the volume knob to enter the pass code then
rotate volume knob to the right to lock Parental Control
Mature Channels ON or rotate volume knob to the left to
unlock Parental Control Mature Channel, OFF. (Default is OFF)
Direct Channel
Tuning
Channel Browsing
1. Long press volume knob then release and immediately press
the BAND/DISP button twice to enter the current pass code then
press the volume knob.
2. Enter the new pass code then press the volume knob a
"SUCCESS" message will appear.
When the RESET button is pressed the unit will tune back to CH 1 and
reset all the Presets back to Factory Default (CH 1). The RESET button
is located behind the display panel. Press the release button located
in the lower right corner of the display panel. Remove the display panel
and press the RESET button then connect the display panel back on
the unit.
Mature Lock
Control
Pass Code Set
RESET
Category
Browsing
1. Press and hold the MUTE button to enter Category Browsing Mode
there will be a "b" flashing while in this mode.
2. Rotate the volume knob to scroll through the categories then press
the volume knob to select the desired category
3. While in the desired category press the channel up/down buttons
to view the channels within the category. Press thevolume knob to
select the desired channel.
4. Press the Band/DISP button to return to viewing categories.
5. When in Category Browse Mode you can press the Band/DISP button
to go to the "All Channels" category directly.
Press and hold the Channel Up or Channel down button, channels will
be rapidly browsed, the longer the Channel up or Channel down button
is pressed and held the channel browsing will become more rapid,
once the Channel Up or Channel down button is released the unit will
tune to the desired channel.
