2
MGH37BT
OPERATION
Mounting
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
• Once a suitable location has been determined, drill the hole and secure the stereo
using the metal mounting bracket. If the bracket needs to be shortened, remove the
appropriate number of breakaway segments using a pair of pliers.
Fuse
:
When replacing the fuse, make sure
new fuse is the correct type and
amperage. Using an incorrect fuse
could damage the radio.
Tip:
When a suitable ground wire is
not present in the vehicle wiring
harness, connect the black ground
wire to the vehicle chassis.
Break Lines
Color
Connection
Red
12V Ignition / Accessory
Black
Ground
Blue
Remote Turn-on B (+)
Grey
Right Front (+)
Grey/Black
Right Front (-)
White
Left Front (+)
White/Black
Left Front (-)
Violet
Right Rear (+)
Violet/Black
Right Rear (-)
Green
Left Rear (+)
Green/Black
Left Rear (-)
Yellow
Camera Input (RCA)