4
LU50PB/LU50PW
INSTALLATION
Mounting & Connecting Speakers
For ease of installation, the DUAL LU50 includes an easily
removable mounting bracket with each speaker. Once
mounted, the bracket allows the DUAL LU50 to be pivoted to
its ideal location. The thumb screws knobs (included), when
tightened properly , will hold the selected speaker position.
Avoid over tightening the knob. Before attempting the
installation, carefully evaluate the mounting surface,
making sure that its composition and construction are
strong enough to support the load safely. If you are unsure
about the type of mounting hardware for your installation,
consult a professional contractor or a knowledgeable
hardware store. The anchors and screws to attach the LU50
are not included and must be purchased separately. The
LU50PB/PW bracket is suitable only for attaching the
speaker to walls or ceilings constructed of Solid wood,
brickwork, concrete, hollow buildings block or wood studs.
Do not mount the bracket to non-reinforced plaster or
sheetrock (gypsum board). Once the bracket is secure,
reattach the speaker using the thumb screws included.
Speaker Cable -Typical speaker cable has a pair of separate
speaker wires with insulating jackets that are molded
together. We recommend you use 18-gauge speaker wire
for hooking your speakers to your receiver.
Polarity - All speakers in a system must be connected with
the same polarity. Speaker wire is marked for polarity so
that you can identify the individual wires in the molded pair.
Polarity is shown by a color stripe on the insulation, by
ridges molded into the insulation, or by the colors of the
wires–one copper and one silver.
Important - Always connect the red (+) terminal on the
receiver to the red (+) terminal on the back of the DUAL
LU50, and the black (-) terminal on the receiver to the black
(-) terminal on the back of the DUAL LU50.
Mounting
Your Speakers
Connecting
Your Speakers
