5
XD6320
OPERATION
General Operation
Press
RELEASE
and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Remove trim ring and install supplied #1 x 7/32” Phillips
head screw through left side of mounting frame into faceplate.
Press
POWER
or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press
POWER
to turn the unit off.
Press
MODE
to select between tuner, CD player and auxiliary
input. Modes of operation are indicated in the display.
Press
LOUD
to activate and deactivate the loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Adjust volume using rotary encoder (00-46).
Press and hold
POWER
for 3 seconds to program currently
selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
Press
EQ
to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve (if one is selected).
Press
DISP
to select between clock and radio frequency
(tuner mode), clock and CD track/elapsed time (CD mode), or
clock and AUX (AUX mode).
With the unit on, press and hold
DISP
until the clock begins
to flash, then release. Press
TUNE
nn
to adjust the hours
and
TUNE
ll
to adjust the minutes. Press
DISP
momentarily to save the selected time.
Faceplate Removal
Semi-permanent
Faceplate Installation
Power On/Off
Mode
Loudness
Volume
Programmable
Turn-On Volume
Preset EQ Curves
Display
Set the Clock