18
If you experience any of the following difficulties while
using the system, use this troubleshooting guide to
help you remedy the problem. Should any problem
persist, consult your nearest service center.
No power
•
Is the power cord firmly plugged into the power out-
let?
•
One of the safety mechanisms may be operating.
In this event, unplug the player from the power out-
let briefly and then plug it in again.
No picture
•
Check that the system is connected securely.
•
The video connecting cord is damaged. Replace it
with a new one.
•
Make sure you connect the system to video input
connector on the TV.
•
Make sure you turn on the TV.
•
Make sure you select the video input on the TV so
that you can view the pictures from this system.
The picture noise appears
•
Clear the disc.
•
If video from this system has to go through your
VCR to get to your TV, the copy-protection applied
to some DVD programs could affect picture quality.
If you still experience problems after checking your
connections, please try connecting your DVD sys-
tem directly to your TV S-Video input, if your TV is
equipped with this input.
No Colour in picture
•
The disc format is not according to the TV set used
(PAL / NTSC)
•
Ensure DVD player is not connected through VCR.
Severe hum or noise is heard
•
Check that the speakers and components are con-
nected securely.
•
Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
•
Move your TV away from the audio components.
•
The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
•
Clear the disc.
The language for the subtitles cannot be changed
when you play a DVD
•
Multilingual subtitles are not recorded on the DVD.
•
Changing the language for the subtitles is prohib-
ited on the DVD.
The subtitles cannot be turned off when you play
a DVD
•
Depending on the DVD, you may not be able to turn
the subtitles off.
The angles cannot be changed when you play a
DVD
•
Multi-angles are not recorded on the DVD.
•
Change the angles when the angle mark appears
on the TV screen.
•
Changing the angles is prohibited on the DVD.
The system does not operate properly
•
Static electricity, etc., may affect the system
’
s op-
eration.
Press the
POWER
button to turn off, then press
again to turn on.
T
T
T
T
Trrrrroub
oub
oub
oub
oubleshooting
leshooting
leshooting
leshooting
leshooting
