Dual AXXERA XDMA7800, Инструкция по установке и эксплуатации, Страница: 7 / 36

7
XDMA7800
Press MENU to access the setup menu, then turn the volume knob to cycle through
menu categories: Audio, Color, Display, Tuner, iPod, Bluetooth and General.
• When desired category appears in the display, press SELECT , then rotate the
volume knob left/right to cycle through the options in each category.
• When desired option appears in the display, press SELECT , then rotate the volume
knob left/right to adjust or activate desired function.
• Press BACK to return to the previous menu, or exit the menu while the main menu is
displayed.
Setup Menu
Audio Menu
Function Options Action
Bass
Level Adjust the frequency bass ouput from -6 to +6.
Quality Factor
Adjust the bass quality factor: 0.7, 1.0, 1.4, 2.0.
• Narrows/expands the bandwidth around the bass center frequency.
Center
Frequency
Adjust the bass center frequency: 50Hz, 100Hz, 200Hz.
• Focuses the bass level adjustments around a specific frequency.
Middle
Level Adjust the mid frequency ouput from -6 to +6.
Quality Factor
Adjust the mid quality factor: 0.7, 1.0, 1.4, 2.0.
• Narrows/expands the bandwidth around the mid center frequency.
Center
Frequency
Adjust the mid center frequency: 0.5kHz, 1.0kHz, 2.0kHz.
• Focuses the mid level adjustments around a specific frequency..
Treble
Level
Adjust the treble frequency output from -6 to +6.
Quality Factor
Adjust the mid quality factor: 0.7, 1.0, 1.4, 2.0.
• Narrows/expands the bandwidth around the treble center frequency.
Center
Frequency
Adjust the treble center frequency: 5kHz, 10kHz, 15kHz.
• Focuses the treble level adjustments around a specific frequency.
Balance Left - Right Shift the speaker output from the left (-12) to the right (+12).
Fader Front - Rear Shift the speaker output from the front (-12) to the rear (+12).
Equalizer Preset EQs
Select between Flat, Pop, Jazz, Classic, Beat, Rock, User.
• Any Bass, Mid or Treble adjustments are saved as the "User" EQ.
Subwoofer
Level Adjust the level of the subwoofer output from 0 (off) to +12.
Frequency
Set the cut-off frequency for the low-pass filter: Full, 55Hz, 85Hz, 120Hz.
• Filters out mid/treble frequencies from the subwoofer output.
Phase Reverses the polarity to accomodate forward/rear firing mounting options.
High Pass
Filters
Off
62/95/135
Set the cut-off frequency for the high-pass filter: Off, 62Hz, 95Hz, 135Hz.
• Filters out bass frequencies from the front/rear speaker outputs.
• Selecting Off allow the full range of frequencies to the speakers.
Source Level -6 to +6 Adjusts the output level for each mode individually from -6 to +6.
Loudness Off/1/2/3
Set the loud setting: Off, Loud 1, Loud 2, Loud 3.
• Enhances the bass and treble frequencies at low volumes.
Press MENU, then press SELECT when Audio is highlighted to enter the Audio Menu.
Rotate the volume knob to cycle through the following options.