3
XDMA7200
Steering Wheel Interface Input
PAC SWI-PS connection
(sold separately)
REAR
RCA Preamp Output
Connections
FRONT
SUBWOOFER
3.5mm
BLUE
BLACK
RED
YELLOW
Bluetooth Microphone
(must be connected for Bluetooth functionality)
Bluetooth Microphone Input
Connect the included
Bluetooth microphone.
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
Ground
Connect to the vehicle
chassis ground.
Accessory
Connect to an existing ignition
circuit or switched 12 volt source.
Memory
Connect to the battery
circuit or constant 12 volt source.
Right Front
Gray/Black (-)
Gray (+)
Left Front
White/Black (-)
White (+)
Left Rear
Green/Black (-)
Green (+)
Right Rear
Violet/Black (-)
Violet (+)
Antenna Input
Connect the vehicle antenna
Wiring Diagram
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse could
damage the radio.
The XDMA7200 uses one
10 amp ATM fuse located
beside the wiring connector.
