Dual AXXERA X2DMA500, Инструкция по установке и эксплуатации

Страница: 28 / 36

28
X2DMA500
Bluetooth
®
Operation
Receiving and Ending Phone Calls
During a Phone Call
Incoming phone calls will automatically appear on the display
and a ring tone will be heard.
Note : The volume of the ring tone depends on the volume
level of the X2DMA500. The incoming ring tone may not be
heard if the volume is set to a low level or mute is activated.
• Press to receive the incoming phone call.
• Press to refuse the incoming phone call.
During an active phone call, press to end a phone call.
If the phone call was received when listening to music in
another mode, the X2DMA500 will resume the previous
mode.
Turn the volume knob to adjust the volume level during a
phone call. Bluetooth mode has a separate volume level
from the main volume of other modes. The X2DMA500 will
remember the volume level in Bluetooth mode and always
return to the last volume level for each phone call.
Press MUTE during a phone call to turn the X2DMA500's
external microphone off. Press MUTE again to resume
microphone operation.
Press DISPLAY during a phone call to transfer the call from
the X2DMA500 to the cell phone. Press DISPLAY again to
toggle the audio back to the X2DMA500.
During a phone call, if there is a second incoming call, press
to place the first call on hold and switch to the second
phone call. Press again to switch back to the first call.
During a phone call, when there are no additional incoming
calls, press to place the call on hold. Press again to
resume the phone call.
Note : Audio transfer, call waiting and call hold must be
supported by the mobile phone and service provider to
function properly.
Receiving a Phone Call
Ending a Phone Call
Volume
Microphone Mute
Audio Transfer
Call Waiting
Call Hold