Dual AM/FM/CD/MP3/WMA/USB/3.5mm Receiver XDM6350, Инструкция по установке и эксплуатации

Страница: 8 / 24

8
XDM6350 OPERATION
Press ESC to exit any menu adjustment mode.
Press AUDIO/MENU momentarily to select between Volume
(default), Bass, Treble, Balance, Fader, Subwoofer and
Source Volume Level.
Press AUDIO/MENU until BASS appears, then press SELECT
to confirm. Rotate encoder left/right to adjust (-6 minimum /
+6 maximum).
Press AUDIO/MENU until TREBLE appears, then press
SELECT to confirm. Rotate encoder left/right to adjust ( -6
minimum / +6 maximum).
Note: Any adjustment to the Bass or Treble settings
automatically cancels the current EQ curve (if one is
selected).
Note: Bass and Treble settings are retained for each mode
individually.
Press AUDIO/MENU until BAL appears, then press SELECT
to confirm. Rotate encoder left/right to adjust (BAL L 12-BAL
00-BAL R 12). BAL 00 represents equal balance.
Press AUDIO/MENU until FADER appears, then press
SELECT to confirm. Rotate encoder left/right to adjust (FAD
F 12-FAD 00-FAD R 12). FAD 00 represents equal fader.
Press AUDIO/MENU until SUB-W appears, then press
SELECT to confirm. Rotate encoder left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
The source volume level control allows a gain adjustment
for each audio source: AM, FM, CD, AUX and USB. Set the
source volume level for each mode, depending on the
relative volume of each audio source.
To set the source volume level, press AUDIO/MENU until
SRC LEVEL appears. After one second, the current mode
will appear on the display. Turn the rotary encoder to adjust
the audio level of the current source (-6 m6
maximum).
Note: Only the current mode will be available for
adjustment. To adjust another mode of operation, press
MODE until the desired mode is selected, then set the
source volume level for that mode.
Escape
Audio
Bass
Treble
Balance
Fader
Subwoofer
Source Volume Level
General Operation
BASS VOLUME TREBLE BALANCE FADER SUBWOOFER SOURCE LEVEL