Cortez Stool
www.DTYStore.com
Page
3
of
6
Assembly Instructions:
Step 1
Wait to fully tighten all hardware until the end of Step 2.
A. Place Seat (A) upside down on a soft surface. Use two Bolts (H1), two Spring
Washers (H2), and two Flat Washers (H3), to
loosely
attach Right Leg (C) to
Seat (A).
TIP: Leg should line up perfectly with the apron of the chair, if there are any
gaps between the leg and the seat frame, the leg is in the wrong corner
A. Use two Bolts (H1), two Spring Washers (H2), and two Flat Washers (H3), to
loosely
attach Left Leg (B) to Seat (A).
B. Place Side Stretcher (E) in the slot on Right Leg (C), and in the slot on Left Leg
(B) Be sure the screw slots are facing up.
C. Tighten the bolts on Right Leg (C) and Left Leg (B)
3
3
2
1
4
2
1
4