background image

 

 

6- IMPORTANT SAFETY INFORMATION 

 

 
 
6.1 Fire prevention: 
 

-It is permissible to place the unit on normally flammable surfaces. 
Suitable for mounting on normally flammable materials surfaces greater than 200°C 
with some combustion time lag. 
-Minimum distance from the closest illuminable surface: 0,5 m. 

 

 

 
6.2 Prevention of electric shock:   
 

-Class II LED product according to standard EN 60598-1. 
 

 
6.3 Safety:  
 

-Risk Group 2 product according to EN 62471.  
CAUTION. Do not look directly into the light output. May be harmful to the eyes and 
skin. 
 
-Do not stare at the operating light source. 
   
-The light source contained in this luminaire shall only be replaced by the 
manufacturer or his service agent or a similar qualified person. 
-The unit is not for household use and must be installed by a qualified electrician or 
experienced person. 
-The projector should always be installed with bolts, clamps and other tools that are 
capable of supporting the weight of the unit. 
-Always use a second safety cable to sustain the weight of the unit in case of the 
failure of the main fixing point. 
-The external surface of the unit, at various points, may exceed 90°C. Never handle 
the unit until at least 10 minutes have elapsed since the projector was turned off. 
-Never install the fixture in an enclosed area lacking sufficient air flow.  
 
The ambient temperature should not exceed 40°C.                                                        

                                
             

 

    

6.4 Level of protection against the penetration of solid and liquid objects: 

 

 

-The projector is classified as an outdoor appliance and its protection level against the 
penetration of solid and liquid objects is IP65. 
Suitable for wet locations. 

 
 

 

6.5 Waste Electrical and Electronic equipment (WEEE) directive: 

 

 

-The machine, accessories and packaging should be sorted for environmetal-friendly 
Recycling. 
For  EC  countries:  according  to  the  European  Directive  2012/19/EC  for  Waste 
Electrical  and  Electronic  Equipment  and  its  implementation  into  national  right, 
luminaires that are no longer usable must be collected separately and disposed of  in 
an environmentally correct manner. 

 

!

!

Содержание Titan HP













Отзывы: