SLICE Free Motion
Headform User’s Manual
January 2018
10
(Rev. 0)
SLICEWare Software
Software Installation
1.
Locate the set-up.exe file on the CD or USB drive provided. Double-click the file
to begin the installation and follow the prompts on your screen.
2.
When installation is complete
, copy the XML file found in the folder “
copy contents
to SLICEWare directory after software install
” to the SLICEWare directory
. (The
XML file contains the sensor information.) If you were not provided an XML file,
you will have to enter this information later.
3.
Start SLICEWare by double-clicking the desktop icon or go to Programs/
SLICEWare.
If you have any questions about software installation, please contact
. For
a detailed software manual, please see
Communicating with the SLICE FMH Headform System
4.
Connect cable to the LEMO receptacle on the backplate (Figure 4). Next, connect
the cable to the power supply provided (Figure 5) and your PC. (The SLICE FMH
Headform system can be connected to the PC before or after starting the
software.)
5.
If you provided your own sensors or had to replace a sensor, you can manually
enter the sensor information into the SLICEWare software before using your SLICE
FMH Headform system. (Check that the sensors that are installed in the FMH
Headform are visible on the
tab. If any sensor is missing, you need to
manually install it.) You will need the calibration data provided with your sensors
to do this. Each sensor must also be assigned to the correct axis and optional
ISO code.
