DTS NICK NRG 501, Руководство пользователя, Страница: 19 / 32

19
13- DISPLAY FUNCTIONS
WIRELESS
WIRELESS DMX
Wieless DMX enabled / disabled.
By activating WDMX MODE, it will
be possible to control NICK NRG
501 via D.T.S. ANTENNA Wireless
DMX Transmitter (cod. 03.E1271
–
03.E1296
– 03.E12101).
Wireless DMX Receiver Kit
(Cod. 03.LA.126) on NICK NRG
501 is available on request.
Logging on NICK NRG 501 (WIRELESS DMX must be enabled on the unit).
To log on the NICK NRG 501 in the WIRELESS system simply press and quickly release the function
button on the transmitter .
The transmitter will start flashing rapidly red/green scanning for new free receivers / NICK NRG 501
units. When a NICK NRG 501 logs on to the transmitter the LINK green light on transmitter starts to
flash rapidly.
After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting
data. The NICK NRG 501 now try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is seen
on the transmitter and solid display is seen on NICK NRG 501.
2. No DMX signal connected, the Antenna transmitter will flash red/green; display blinking on NICK
NRG 501.
To log off NICK NRG 501 from a transmitter simply select UNLINK function under WIRELESS DMX
MENU and press ENTER.
When NICK NRG 501 is logged off the display is blinking, meaning its available for log in on a new
transmitter.
Logging out a NICK NRG 501.
Select UNLINK function under WIRELESS DMX MENU and press ENTER.
When NICK NRG 501 is logged off the display is blinking, meaning its available for log in on a new
transmitter.
Logging out all NICK NRG 501 linked to a transmitter.
Press and hold the function button of the transmitter for about 3 seconds. When the display is blinking
on NICK NRG 501, it mean that the units are logged out.
Transmitter, Status LED.
Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast flashing red/green, log in mode (every free NICK NRG 501 unit, not logged in to any other
transmitter, will be logged on)
NICK NRG 501 Status.
Display blinking, not logged on to a transmitter (free).
Solid display, logged on to a transmitter and receiving dmx data.
MENU ENTER DOWN UP
20 ch
DMX SET
DMX MODE
MENU ENTER DOWN UP
WIRELESS
UNLINK
20 ch
DMX SET
DMX MODE
OFF
WIRELESS
SELECTION
MENU ENTER DOWN
UP
MENU ENTER DOWN
UP
20 ch
DMX SET
DMX MODE
ON
WIRELESS
SELECTION
MENU ENTER DOWN UP MENU ENTER DOWN UP
Up-Down Menu Up-Down ENTER
ENTER
ENTER
ENTER
WIRELESS DMX SYSTEM
DISABLED (Default)
WIRELESS DMX SYSTEM
ENABLED
UNLINK = LOG OUT