DTS NETIMPRESS avant, Руководство по оборудованию

Страница: 4 / 57

3
For Your Safety
In order to ensure the proper and safety use of NETIMPRESS avant, please be sure to follow the
safety precaution mentioned below as operating NETIMPRESS avant. DTS INSIGHT
CORPORATION has no responsibility or guarantee for any injuries which occur as a result of the
violation of these safety caution and warnings.
This manual uses the icons as below to use NETIMPRESS avant safety.
It indicates not only that there is a danger to human as well as to the
equipment, but also that it is necessary to refer to the instruction manual.
It indicates a safety ground terminal. As this terminal is on the main unit,
please be sure to connect this terminal to the ground before operating.
Warning
In order to avoid the risk of death or serious injury which may occur as a result
of an incorrect use.
Note
In order to avoid the risk of minor or material damage which may occur as a
result of an incorrect use.
■ To avoid the risk of death or serious injury to users, such as electrocution or
any other accidents, as well as the risk of damage to NETIMPRESS avant,
please follow the warnings mentioned below.
Warning
Use in Chemical Gases
Do not use NETIMPRESS avant in an environment where are combustible or explosive gases or
steam.
Using NETIMPRESS avant in such environment is extremely dangerous.
Usage environment
This programmer is only for indoor use. Use it at an altitude of 2000 meters or less.
Available voltage range and power-supply frequency must not exceed the rated voltage ± 10%,
50/60 Hz±2 Hz.
We are assuming NETIMPRESS avant will be used under Overvoltage category II and Pollution Degree
2.
Install it around an electric outlet so that you can unplug it to shut down the power easily.