DTS MINI BRICK, Руководство пользователя, Страница: 17 / 32

17
10- RDM FUNCTIONS
RDM MANUFACTURER-SPECIFIC PIDs
NO DMX ACTION To set the desi
red fixture’s behavior in case DMX
signal is missing or not available.
1 = Black-out
2 = CHPR (demo program steps 01..16 same as
menu “NDMX > CHPR”)
3 = All channels @ 100%
4 = CUSTOM (RGBW values set into the menus
“RED NO DMX”
“GREEN NO DMX”
“BLUE NO DMX”
“WHITE NO DMX”
5 = Keep last valid DMX signal
11- FIRMWARE UPDATING
To update the software version of the MINI BRICK you need:
- DTS RED BOX interface (DTS Code 03.LA.008).
- USB-DMX Driver for the DTS RED BOX interface.
-
“DTS Firmware Upgrade Utility v.2.02” program installed on PC.
- Latest firmware release available for MINI BRICK unit.
Updating the software version.
Please follow the procedure below to perform the update:
1. Install the DTS RED BOX USB-DMX driver on the PC you will use to update the unit
software.
2. Connect the DTS RED BOX interface to a spare USB port on the PC (be sure that
internal switch on DTS RED BOX is set to COM).
3. Connect the unit DMX input to the DTS RED BOX DMX output with a standard DMX
cable and turn ON the unit.
4. Send the new software version into the unit by using
“DTS Firmware upgrade
Utility v.2.02
” program. At the end of the procedure, the unit will reset.