DTS DOCTUS.D 1 Скачать руководство пользователя страница 8

 

 
User Manual 

Ver. 1.02 

6 di 20 

 

 

 

DOCTUS.D 

 

 

 

 

2.4  Safety 

 

These products must be installed by qualified personnel only, following national laws and 
local regulation regarding construction and electrical systems. 
This product can only be installed by personnel qualified for the installation of electrical 
appliances. They must ensure that: 

a.  The installation must be compliant with all relevant regulations, local and national 

laws, bills, norms, and safety regulations; 

b.  The setting must be thoroughly analyzed and one or more preemptive measures 

must be taken in order to ensure adequate protection from overvoltage and 
overcurrent, direct or inducted. 

Do not exceed the specified input voltage and current. 
Do not drop, hit, or shake the product. Strong accelerations can damage the device and 
cancel its warranty. 

 

Burn risk – hot surface 
Never handle the unit until at least 5 minutes have elapsed since the unit was turned off. 

 

The ambient temperature should not exceed 45°C 
If the product has been subjected to drastic temperature variances, for example, following 
transportation, do not connect the fixture until it has reached ambient temperature, as 
moisture condensation may cause electric shock and product damages. 

 

For your own safety, do not stare directly at the operating light source. 
It could cause damage to the eyes and skin. 

 

Photobiological safety Risk Group 2 according to the European Directive EN 62471 
For permanent installation, the product must be positioned so that it can’t be possible to 
stare directly at the light source for a prolonged period of time, from a minimum distance 
of  
DOCTUS.D 1 FC:  

5,77 m (18.93 ft);  

DOCTUS.D 3 FC:  

10,23 m (33.56 ft); 

DOCTUS.D 6 FC  

13,40 m (43.96 ft); 

DOCTUS.D 12 FC  

19,54 m (64.11 ft). 

2.5  Waste Electrical and Electronic Equipment (WEEE) directive 

 

Electrical and Electronic Equipment 
The projector, accessories and packaging should be sorted for environmental-friendly 
recycling. European Community Directive 2012/19/EU on Waste Electrical and Electronic 
Equipment (WEEE). 
(For EC countries: according to the European Directive 2012/19/EU for Waste Electrical 
and Electronic Equipment and its implementation into national right, luminaires that are no 
longer usable must be collected separately and disposed of in an environmentally correct 
manner) 

 

Содержание DOCTUS.D 1
























Отзывы: