6
PROFILO COMPACT
2 IMPORTANT SAFETY INFORMATION
2.1 Fire prevention
-Never locate the fixture on any flammable surface.
-Minimum distance from flammable materials: 10 CM.
-Minimum distance from the closest illuminable surface: 30 CM.
-Connect the projector to mains power via a thermal magnetic circuit breaker.
2.2 Prevention of electric shock
-High voltage is present inside the unit. Unplug the unit prior to performing any function
which involves touching the inside, including lamp replacement.
-A good earth connection is essential for proper functioning of the projector.
-Never connect the unit without proper earth connection.
-The fixture should be located in places with a good air ventilation.
2.3 Protection against ultraviolet radiation
-Never turn on the lamp if the front lenses are damaged. Their respective shielding
function will only operate efficiently if they are in perfect working order.
-Never look directly the lamp when it is on.
2.4 Safety
-The projector should always be installed with bolts, clamps and other tools that are
capable of supporting the weight of the unit.
-Always use a second safety cable to sustain the weight of the unit in case of the failure
of the main fixing point.
-The external surface of the unit, at various points, may exceed 70°C. Never handle the
unit until at least 10 minutes have elapsed since the lamp was turned off.
-Always replace the lamp if any physical damage is evident.
-Never install the fixture in an enclosed area lacking sufficient air flow. The ambient
temperature should not exceed 40°C.
-A hot lamp may explode, so always wait for at least 10 minutes prior to attempting to
replace the lamp.
-Always wear suitable hand protection when handling the lamp.
2.5 Level of protection against the penetration of solid and liquid objects
-The projector is classified as an ordinary appliance and its protection level against the
penetration of solid and liquid objects is IP 20.
The projector contains electric and electronic components which should under no
circumstances come into contact with oil, water or any other liquid. The proper unit
functioning would be compromised should this occur.
