VOLTAGE AND FREQUENCY
operate at 230 VOLT 50Hz; Lamp MAX Power 50W
~
; Lamp MAX Power 50W
Prior to connecting the unit to your mains supply, ensure that the model in your possession correctly
matches the mains supply available. For connection purposes, ensure that your plug is capable of
supporting 6 amps at 230V.
Strict adherence to regulatory norms is strongly recommended.
INSTALLATION
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the weight of the
unit, as should any clamps used to hang it. The structure should also be sufficiently rigid so as not to
move or shake .
.
Safety cable
We recommend the use of a safety cable connected to the unit and to the suspension truss in order to
avoid the fixture accidentally falling should the main fixing point fail. Make sure that the iron cable can
bear the weight of the entire unit.
You may attach the safety cable as shown in the picture below.
Protection against liquids
The projector contains electric and electronic components which should under no circumstances come
into contact with oil, water or any other liquid. The proper unit functioning would be compromised
should this occur.
PAR16 GU/GZ10
PAR16 Gx5.3 operate at 12V
.
WARNING: for Main Grid connection, we reccomend the use of an isolation transformer.
Isolation transformers provide galvanic isolation and it’s used to protect against electric shock
7
!
!
PAR 16
