2.3.
Single remote removing form receiver memory
While holding receiver button press active button on the
remote. If valid removal LED fade.
Caution
!
Holding receiver button for more than 15 seconds will erase
memory
2.4. Changing buttons registration to channel
4
remove remote from memory (see section 2.3.)
4
register remote according to section 2.1. or 2.2.
2.5.All remotes removing
To remove all remotes from receiver memory press and
hold receiverA and B buttons for 15 seconds. Release button when
LED fade.
Memory format unlock easy remote registering
function.
2.6. Verifying number of registered remotes
To verify number of registered remotes prior registering
or removing remote is required.
After registering or removing remote hold receiver button for 5
more seconds. LED will blink showing number of registered
remotes. First number of tens (from 0 to 20 long pulses) then
number of units (from 0 to 9 short pulses).
Fig.5
Lock disabled/enabled
Fig.6
Single remote removing.
Fig.7
All remotes removing.
lock disabled
4a
lock enabled
4b
1
3
1 1
3
2
1
1
1
3
3
lock disabled
lock enabled
1
2
...press remote button
while holding
A and B
button...
press and hold
min. 15 seconds
Fig.8
Pulses example showing number of registered remotes - 46.
number of tens - 4x10
number of units - 6
spó
ł
ka z ograniczon
ą
odpowiedzialno
ś
ci
ą
spó
ł
ka komandytowa
