58
A
A
A
Remote
declared
to edition
1
2
3
4
Fig.8.
Edition of the assigned remote.
2.2.2. Edition of the assigned remote control
The
option of the receiver, apart from the main function of remote control
PP
assigning, has also the sub-options used for editing already registered remote.
Sub-options enabling the edition of the remote control:
- sub-option
– copying preferences from remote number 001 (see 2.2.2.1)
CE
- sub-option
- assigning the buttons of the remote control to the
P1, P2, P3, P4
receiver channels (see pt. 2.2.2.2)
- sub-option
– switching on/off blocking of the remote assigning of the remote
bc
controls (pt. 2.2.2.3)
-sub-option
– removing the remote control from the memory of the receiver (pt.
UP
2.2.2.4)
Prior to the edition it is necessary to
which is supposed to be
declare the remote
edited. It is possible to declare the remote control which we physically owe as well as
the remote without its physical presence. In the latter it is necessary to have the
position number of the remote control which is supposed to be declared.
Declaring physically owed remote control for editing (fig.8):
- pressA button of the receiver while PP option on the display
- press three times the button of the remote that is to be registered, until ‘ -0’
appears on the display
- press A button to confirm. The position number of the remote control in the
memory of the receiver will be shown on the display, confirm again by pressing A
button. Since that moment it is possible to edit the remote control thanks to sub-
options which enable to change the settings of the individual remote control.
Withdrawing from the changes takes place after pressing B button on the
receiver.
